Zircon TriScanner Pro SL

TriScanner Pro SL finds the edges of studs and joists, finds copper (and other non-ferrous metal) pipes up to 1-1/2 inches (38 mm) deep, and finds rebar (ferrous metal) in concrete up to 3 inches (76 mm) deep, while continuously detecting hot unshielded AC wires. TriScanner Pro SL is four sensors in one tool with the patented SpotLite Pointing System and rubberized grip.

• Stud Scan Mode - TriScanner Pro SL finds the edges of studs and joists up to 3/4 inches (19 mm) deep in normal mode.
• Stud DeepScan Mode - In Zircon's patented DeepScan mode, TriScanner Pro SL can find studs up to 1-1/2 inches (38 mm) deep behind drywall, paneling, or plywood.
• Metal Finder - Finds copper and other non-ferrous metal up to 1-1/2 inches (38 mm) deep. Finds ferrous metal such as rebar in concrete up to 3 inches (76 mm) deep.
• AC WireWarning - Continuously detects hot unshielded AC wiring—an important safety feature.


Key Features
• Finds both wood and metal studs
• SpotLite Pointing System
• DeepScan mode
• Metal scan for finding pipes, nails, rebar, and other hidden metals
• Constant hot AC detection for safety


Applications
• Find the edges of wood or metal studs or joists to:
• Hang cabinets, pictures, mirrors, and shelves securely
• Install ceiling fans, grab bars, and chandeliers
• Find metal pipes behind tile and in concrete
• Find conduit, rebar, electrical boxes, exhaust vents, and ducting
• Detect hot electricity behind walls, floors, and ceilings


The Zircon Advantage
• Uses a patented sensor to pinpoint the edges of wood or metal studs behind walls, floors, or ceilings.
• Exclusive, patented SpotLite Pointing System shines a bright beam of light over target edges.
• Metal-only setting looks specifically for metal pipes or rebar.
• AC detection is active in all modes for safety.
• DeepScan mode for extra-thick surfaces—up to 1-1/2 inches (38 mm) of drywall, paneling or plywood, or a combination of them, and through most bare wood flooring.


Technical Information
• Dimensions - 6.32 in. H x 3.13 in. W x 1.27 in. D (161 mm x 80 mm x 32 mm)
• Weight - 6.5 oz. (184 g) without battery
• Battery type: 9-V alkaline (not included)
• Position accuracy Wood Studs:
• Stud Scan mode: typically within 1/8 in. (3 mm) using the dual scan and mark procedure
• DeepScan mode: typically within 3/16 in. (5 mm) using the same procedure Position accuracy Metal studs: Typically within 1/2 in. (13 mm) using the dual scan and mark procedure
• Metal Scan mode Depth
• Up to 3/4 in. (19 mm) in Stud Scan mode
• Up to 1-1/2 in. (38 mm) in DeepScan mode
• Up to 1-1/2 in. (38 mm) for copper in Metal Scan mode
• Up to 3 in. (76 mm) for rebar in Metal Scan mode
• NOTE: Sensing depth and edge detection can vary due to moisture content of materials, wall texture, paint, etc.
• AC Position accuracy - Typically 90–250 V at 50–60 Hz laterally within 12 in. (150 mm) of a hot unshielded wire
• AC Depth - Typical depth of 2 in. (50 mm)
• Operating temperature - 20° to 120°F (-7° to 49°C)
• Storage temperature: -20° to 150°F (-29° to 66°C)
• Humidity - 80% RH (non-condensing)
• Water resistance - Splash and water resistant, not waterproof