Sonin, Multi-Measure Combo PRO - 10300

Sonin’s top-selling tool for measuring outdoors (and indoors) - up to 250'. For the architect, landscaper, real estate appraiser or crime scene investigators.
Anyone who uses an ordinary tape measure will want a SONIN Electronic Measuring Tool when they see how convenient and easy-to-use it is.

SONIN Electronic Distance Measuring Tools send out narrow beams of sound waves that "bounce" off solid objects back to the hand-held receiver. Custom electronics and a microprocessor then convert elapsed time into a distance measurement and display it on the LCD. (When used with its electronic target, the Combo PRO model uses both sound waves and an infrared beam.) The Laser Targeting Range Finder adds a visible laser to assist the user in locating their target area.

Every SONIN Electronic Distance Measuring Tool has a built-in calculator to add linear measurements and compute areas and volumes. Intelligent software, improved accuracy and easy-to-understand instructions complete the attractive package

Features
• Measures from 1'6" Up To 60 Feet (18 meters) in single unit mode
• Measures from 1'6" Up To 250 Feet (75 meters) in dual unit mode with target
• Displays measurements to the 1/4”
• Electronic target has LED to confirm signal being received
• Computes areas and volumes
• Adds and subtracts linear measurements, area, volumes
• Measures in Ft/In, M/Cm decimal Ft and Yds
• Tracking and Validate Modes
• 7 memories with easy recall
• Automatic internal temperature compensation
• Auto shut-off 7 minutes after last use
• Multi-lingual Detailed instruction booklet
• Multi-lingual Quick Reference instruction label
• Low Battery Warning
• Requires Two 9 Volt Batteries(not included)
• Accuracy 99.5% +/- 1/4"(1cm)
• Protective Pouch with Belt Loop
• Recommended for Indoor or Outdoor Use
• One Year Warranty


Detailed Features
• Electronic Distance Measuring Tool - Sends out narrow beams of sound waves which "bounce" off solid objects back to the hand held receive. Custom electronics and a microprocessor convert elapsed time into a distance measurement and display it on the LCD. When using the electronic target, it uses both sound waves and infrared beam.
• Measures from 1'10" Up To 60 Feet in single unit mode (without electronic target) - Requires 1 square foot of perpendicular hard surface for every 10' of measured distance ( at 30' a door or window is adequate)
• Measures from 1'10" Up To 250 Feet in dual unit mode (with electronic target) - great for indoor our outdoor use!!! Target has tripod fitting so that it can be mounted if necessary.
• Electronic target had LED so that you can determine when a signal is being received. Slow blink confirms that target is on and rapid flash confirms when signal is being received.
• Computes areas - Length x Width = Square Feet - Measure length then press (X) key. Measure Width then press (X) key. The total square feet will show on the display ( sq2 ).
• Computes volumes - Length x Width x Height = Cubic Feet - Measure Length then Press (X) key. Measure Width then press (X) key. Measure Height then press (X) key. The total cubic feet will show in the display ( ft3 ).
• Adds linear measurements, areas, volumes
• For Adding Linear Measurements - Take first measure meant the press (+) key, take second measure then press (+) again .. etc.
• For Adding Areas or Volumes: Compute area or volume as show above then press (+) key (this stores the area or volume in the (+) memory). Compute your next area or volume and then press the (+) key again. Your grand total area or volume will be displayed (example: L (X) W (X) H (X) (+) L (X) W (X) H (X) (+).
• Measures in Feet/Inches, meters/centimeters, decimal feet or yards - Unit defaults to Feet and Inches. To change the default, after taking your measurement hold down the ( C ) key until desired mode is reached. This will change the mode.
• Tracking and Validate Modes - You can track a distance and/or validate a distance.
• Tracking - Hold down tracking bar to track a distance. Unit will taken continuous readings.
• Validate - When you have reached your distance, validate the measurement by pressing then releasing the validate bar. The unit will take several like measurement before giving you a reading. (It validates itself.)
• Field Calibration - Can be field calibrated to ensure accuracy in other than standard conditions.
• Memory - 7 memory compartments (5 memory register and two calculation memories)
• Automatic internal temperature compensation - To obtain the temperature of the internal boards press the (+) key and measurement bar at the same time. This is helpful for accuracy. (example - If the unit is kept in a car on a sunny day or in your pocket on a cold sunny day, you can check the temperature to be certain that the unit is the same temperature are the area you are measuring. If you are off, then wave the unit to acclimate to the current measuring temperature to ensure accuracy within specs.
• Auto shut-off 7 minutes after last button is pressed - This helps save the life of the 9 Volt Battery
• Detailed instruction booklet in English / French / Spanish languages.
• Quick Reference instruction label on back of unit in English, French or Spanish.
• Low Battery Warning - "BATT" shows on the display when your batteries are low.
• Requires Two 9 Volt Battery (not included)
• Accuracy - 99.5% ± ¼" in single mode or 99.5% ± ½" in dual mode
• (formula for margin of error: i.e. 20' x 12" x .005 = 1.2" +/- ¼" at 20 Feet)
• Protective Carry Pouch with Belt loop included.



• Following are just some of the types of customers using our Electronic Distance Measuring devices along with their uses:
• Ideal for anyone who measures outdoors !
• CONTRACTORS - Allows fast and accurate estimate of material requirements.



• REAL ESTATE AGENTS - Measures the dimensions of homes and apartments to provide prompt answers to clients questions.
• ARCHITECTS - Quickly determines rough dimensions
• ESTIMATORS - Measures in feet, square feet or cubic feet as needed.
• APPRAISERS - Easily calculates square feet or cubic feet as needed
• DO-IT-YOURSELFERS - Use it for all your measuring needs.
• LAYOUT AND FACILITY MAINTENANCE PROS - Assists in positioning or layout operations.
• PAINTERS AND WALLPAPER HANGERS - Calculate the square feet to determine how much material is needed for a job. It DOES NOT figure HOW MUCH paint is need since that would depend on the TYPE of paint being applied.
• LAW ENFORCEMENT AGENCIES - to measure crime and accident scenes.