3M Particulate Respirator with Nuisance Level Organic Vapor Relief 20/Box 8247, R95

Features
• NIOSH approved N95 - At least 95% filtration efficiency against solid and liquid aerosols including oils
• Odor removing filter material - Carbon layer provides relief from nuisance levels of organic vapors for greater comfort.
• All filter design - Provides economical protection, no spare parts to clean or maintain and promotes easier communication.
• Braided headband - Provides comfort and durability.
• Adjustable nose clip - Helps provide a custom fit and secure seal. Reduces the potential for eyewear fogging.


Suggested Applications
• Foundry operations
• Lab settings
• Agriculture
• Petrochemical manufacturing
• Undercoating

You Must Wear the Respirator Correctly!
You will not be protected if you don't wear your respirator correctly. Follow the manufacturer's instructions. For dust masks (also called filtering facepieces or "N95" respirators) and other half facepiece respirators this means:

• The respirator is properly positioned over your nose and mouth at all times
• The top strap or head harness assembly is positioned high on the back of the head
• The lower strap is worn at the back of the neck below the ears
• Nothing (beards, head coverings, etc.) passes between the skin of the face and the respirator's sealing edge.
• Do not take the respirator away from you nose or mouth until you reach clean air!
• The nose and mouth must be covered at all times.
• Both straps must be positioned correctly

Changing the Respirator, Filters, Cartridges
If you are using either a dust mask (also called a filtering facepiece or "N95" respirator) or a rubber or plastic facepiece respirator with replaceable particulate filters (e.g. N95, P100) then:

• Replace the dust mask or change the particulate filters when you notice
• Increased breathing resistance
• Physical damage to any part of the facepiece or filters
• The inside of the dust mask becomes unsanitary
• Time use limitations on the package require replacement